Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
E-ACDCLM
E-ACDCLM

AC & DC Voltage & Current Monitor

NTI Part #: E-ACDCLM
The AC & DC Voltage & Current Monitor measures and reports AC and DC voltage, and reports AC and DC current measured with attached Hall-Effect transducers (sold separately) to the E-2D/5D/16D unit.

Overview

The AC & DC Voltage & Current Monitor measures and reports AC and DC voltage, and reports AC and DC current measured with attached Hall-Effect transducers (sold separately) to the E-2D/5D/16D unit.
  • Reports AC voltage, AC current, DC voltage and DC current.
    • Current measurements require Hall-Effect transducers (sold separately).
    • Polling rate: 1Sa/s.
  • Common applications include: electrical systems, power equipment, battery monitoring, generators, remote sites, controlled environment vaults (CEVs), building automation, data center, cabinets, telecom, substations, storage power supplies, communication huts, indoor/outdoor lighting, power distribution, and medical and test equipment.
  • AC voltage 2-pin terminal block
    • 0 to 240VAC 600V isolated
    • 0.25VAC resolution
    • Accuracy
      • 0 to 220VAC: 2.5VAC accuracy
      • 220 to 240VAC: 5.0VAC accuracy at 77°F (25°C)
  • DC voltage 2-pin terminal block
    • -60 to +60V DC non-isolated
    • 0.12VDC resolution
    • 1.2VDC accuracy
  • One rectifying Hall Effect 4-pin transducer interface for measuring AC current
    • 0.2% resolution
    • Accuracy and range are transducer-dependent (sold separately).
  • One non-rectifying Hall Effect 4-pin transducer interface for measuring DC current
    • 0.2% resolution
    • Accuracy and range are transducer-dependent (sold separately).
  • Supports CAT5/5e/6 cable up to 1,000 ft (305 m).
  • Dimensions WxDxH (in): 6.2x2.3x1.6 (158x58x41 mm).
  • Current consumption: 8mA @ 5VDC, 66mA @ 12VDC.
  • Powered by E-2D/5D/16D.
  • Operating temperature: 32 to 158°F (0 to 70°C)
  • Regulatory approvals: CE, RoHS.
  • Compatible with E-FSC Fiber Converter/Extender.
    • Use to extend the monitor up to 1.2 miles (2km) from the ENVIROMUX unit.