Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
E-SER-2FOMMSC
E-SER-2FOMMSC

RS485/RS232/RS422 to Fiber Converter/Extender

NTI Part #: E-SER-2FOSMST
Environment Monitoring System Sensor Accessories
Sensor accessories compatible with ENVIROMUX® E-2D, E-5D and E-16D

Overview

  • Extends sensor over two singlemode or multimode fiber cables.
    • E-SER-2FOSMST: Using a duplex singlemode 9-micron ST cable, extend to 12.4 miles (20 km).
  • Converts RJ45 cabling into fiber on both ends.
    • Use CATx cable with one end unterminated to connect the ENVIROMUX unit and sensor to the fiber converters.
    • Maximum CATx length is sensor-dependent, but cannot exceed 1,000 ft (305 m) on local and remote ends combined. (See sensor specs for max length.)
  • Built-in surge and static protection.
  • Connectors (local/remote unit):
    • E-SER-2FOSMST:
      • Two ST singlemode fiber connectors.
      • 8-position terminal block.
      • 2-way terminal block for power.
  • Includes two RS485/RS232/RS422 to Fiber Converters, two 12VDC power supplies, and one 5VDC power supply.
  • Dimensions (WxDxH):
    • E-SER-2FOSMST: 3.58x4.96x0.87 in (91x126x22 mm).
  • Operating temperature: -40 to 185°F (-40 to 85°C).
  • Operating humidity: 5 to 95% non-condensing RH.
  • Compatible with E-2D/5D/16D.
  • Regulatory approvals: CE, FCC, RoHS.
  • Sensors Compatible with RS485/RS232/RS422 to Fiber Converter/Extender

    Temperature Temperature/Humidity Liquid/Gas/Air Velocity


    Weather & Outdoor Light/Noise Power Accessories

     

    Application Notes

    • Extend Sensors Up to 1.2 miles Away From E-2D/5D/16D
      Extend Sensors Up to 1.2 miles Away From E-2D/5D/16D
      The E-FSC converts RJ45 cabling into fiber, enabling a sensor to be located up to 1.2 miles (2 km) away from the E-2D/5D/16D unit. Furthermore, between the ENVIROMUX unit and fiber converter, and between the fiber converter and sensor combined, up to 1,000 ft (328 m) of CAT5/5e/6 cable can be used to extend the distance further. Note: by using the Digital I/O Expanders or Temperature/Humidity Sensor with Two Digital Inputs at the remote end, additional sensors can be connected.