Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch

EDID Emulator

Stores and reproduces EDID information for HDMI, DisplayPort and VGA displays.
HDMI EDID Emulators
  • HDMI 2.0 EDID Emulator

    HD4K-EDID-EMLTR (Front & Back)

    The HDMI 2.0 EDID Emulator copies the EDID of the desired HDMI display and connects directly to the HDMI source to ensure that the EDID is not lost in connections between devices such as switches, splitters, and extenders.

    Supports headless operation – no monitor attached to source.

DisplayPort EDID Emulators
  • DisplayPort Hotplug Maintainer

    DP-HP-MNTR-SRC

    The DisplayPort Hotplug Maintainer emulates a DisplayPort display (sink device) by maintaining a hotplug signal between a video source and sink/display. When used with a KVM/video switch, the DP-HP-MNTR-SRC eliminates the need to reconfigure monitor settings when switching between computers.

  • DisplayPort 1.2 EDID Emulator

    DP4K-EDID-EMLTR (Front & Back)

    Overview

    The DisplayPort 1.2 EDID Emulator copies the EDID of the desired DisplayPort display and connects directly to the DisplayPort source to ensure that the EDID is not lost in connections between devices such as splitters and extenders.

     

    Does not support headless operation – monitor must be connected.

     

    Does not support DisplayPort Multi-Stream Transport (MST).

     

    Not recommended for use in conjunction with KVM or video-only switches.

    Reason: When the input channel is deselected, the emulator will be powered off. The host computer connected to that input channel via DP emulator will recognize the emulated monitor as disconnected. An emulator supporting headless and video pass-through operations is required for KVM switch applications.

    NTI is working on a solution, but we do not have an ETA at this time. Contact an NTI product consultant for more information on the DisplayPort Hotplug Maintainer.

  • Headless DisplayPort EDID Emulator

    DP-EDID-EMLTR-HL

    The Headless DisplayPort EDID Emulator simulates the presence of an attached display to a video source. The built-in EDID table stores and reproduces resolutions up to 3840x2160 @17Hz and 1080p at 60Hz.

    Does not support video pass-through operation.

DVI EDID Emulators
  • Low-Cost DVI EDID Emulator

    DVI-EDID-EMLTR-LC (Front & Back)

    The DVI-EDID-EMLTR-LC Low-Cost DVI EDID Emulator simulates the presence of an attached DVI display to a DVI video source. The built-in EDID table stores and reproduces resolutions up to 1920x1200 (WUXGA) and 1080p at 60Hz. When used with EDID-REC-VDH EDID Recorder (sold separately), the EDID of a desired DVI display will be copied and stored to the emulator.

VGA EDID Emulators
  • Low-Cost VGA EDID Emulator

    VGA-EDID-EMLTR-LC (Front & Back)

    The VGA-EDID-EMLTR-LC Low-Cost VGA EDID Emulator simulates the presence of an attached VGA display to a VGA video source. The built-in EDID table stores and reproduces resolutions up to 1920x1200 (WUXGA) and 1080p at 60Hz. When used with EDID-REC-VDH EDID Recorder (sold separately), the EDID of a desired VGA display will be copied and stored to the emulator.