Low-Cost DVI EDID Emulator

The DVI-EDID-EMLTR-LC Low-Cost DVI EDID Emulator simulates the presence of an attached DVI display to a DVI video source. The built-in EDID table stores and reproduces resolutions up to 1920x1200 (WUXGA) and 1080p at 60Hz. When used with EDID-REC-VDH EDID Recorder (sold separately), the EDID of a desired DVI display will be copied and stored to the emulator.

• Emulates an DVI display (sink device) by providing Hot Plug Detect and EDID to the DVI source device.
• Supports HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
• Supports Emulation and Learning modes.
  • Emulation mode: provides EDID to the DVI source device from the emulator's internal memory.
    • Supports headless operation - no monitor attached to source.
    • The selectable resolutions are dependent on the computer's graphic card.
    • Only DVI-EDID-EMLTR-LC is necessary for this function.
  • Learning mode requires EDID-REC-VDH EDID Recorder (sold separately): store a display's EDID for later use.
• Pre-programmed with many standard resolutions with native set to 1920x1200@60Hz.
  • Requires EDID-REC-VDH EDID Recorder (sold separately) to program other resolutions to the emulator.
    • LED indicators provide signal status information.
• Ideal for resolving signal handshaking problems between a source and a display.
  • Ensures that the EDID is not lost in connections between devices such as switches, splitters, and extenders.