Environment Monitoring System Weather & Outdoor Sensors
Weather & Outdoor Sensors compatible with ENVIROMUX-2D, ENVIROMUX-5D and ENVIROMUX-16D
Weather & Outdoor Sensors
Outdoor Temperature Sensor
ENVIROMUX-STS-O
- Applications from -40 to 185°F (-40 to 85°C).
- Accurate to within ±0.9°F (±0.5°C).
- Weatherproof enclosure.
- High resistance to external influences on the cable due to digital output signal.
- Re-calibration is not necessary after initial set-up.
- Quick release waterproof RJ45 connector.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Dimensions WxDxH (in): 4.53x2.56x2.13 (115x65x54 mm).
- Powered by ENVIROMUX-2D/5D/16D.
- Current consumption: 14mA @ 5VDC.
- MTBF: 1,942,123 hrs.
- Compatible with ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with ENVIROMUX-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Wind Speed Sensor/Anemometer
ENVIROMUX-WSS
- Rugged anemometer
- 3-cup rotor pressed on a stainless steel shaft
- Reed switch and magnet providing one pulse per rotation
- Rotor diameter: 5 inches
- Speed range: ~ 3 mph to 125+ mph (~5 kph to over 200 kph)
- Rugged Delrin body with bronze and Rulon bushings
- Flat aluminum mounting bracket with 2 holes. Designed to be mounted on top of a pole or bracket.
- 100 feet of exterior grade wire
- Maximum cable length: 1000 ft (305m)
Barometric Pressure Transmitter
ENVIROMUX-BPT
| Cable gauge | Max distance |
|---|---|
| 20 AWG | 30,000 feet |
| 22 AWG | 18,000 feet |
| 24 AWG | 11,000 feet |
| 26 AWG | 7,000 feet |
| 28 AWG | 4,000 feet |
- Use for determining atmospheric air pressure.
- Pressure range: 20.8 to 32 in Hg (10.2 to 15.7 psi)
- Accuracy: ± 0.14 Hg (±0.07 psi)
- Repeatability: ± 0.03 Hg (± 0.014 psi)
- Pressure Hysteresis: ± 0.02 Hg (± 0.01 psi)
- Long-Term Stability: ± .014 Hg/year (±0.007 psi/year)
- Media compatibility: Clean, dry air and non-corrosive gases
- Output: 4-20mA
- Power requirements: 8-24VDC @ 20 mA
- Max Loop Resistance: Ohms = (V Supply – 8V)/0.02A
- Enclosure Material: Acrylonitrile butadiene styrene
- Dimensions WxDxH: 2.12x3.12x1.78 in (54x79x45 mm)
- Operating temperature: 32 to 140°F (0 to 60°C)
- Requires the ENVIROMUX-S420MA-24V to operate with ENVIROMUX-2D/5D/16D.
- Maximum cable length: 500 ft (152m)
- Powered by ENVIROMUX-2D/5D/16D.
- Regulatory approvals: CE
- Compatible with ENVIROMUX-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.