Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
E-AV-K
E-AV-K

Air Velocity Sensor

NTI Part #: E-AV-K
Reliable mechanical solution for monitoring air flow. Dust resistant design. Requires the E-S5VDC sensor converter to operate.

Overview

  • Reliable sensor for measurement of air velocity.
  • Requires the E-S5VDC sensor converter to operate.
    • Maximum cable length: 1000 ft (305m)
    • Powered by E-2D/5D/16D.
  • Flow range: 0-2000 ft/min (0-10 m/s).
  • Accuracy: ±60 ft/min (0.3 m/s) + 4% of measured value.
  • Dust resistant design.
  • Includes mounting hardware.
  • Operating temperature: -4 to 140°F (-20 to 60°C).
  • Storage temperature: -22 to 140°F (-30 to 60°C).
  • Operating and storage relative humidity: 5 to 95% non-condensing RH.
  • Compatible with E-FSC Fiber Converter/Extender.
    • Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.

Application Notes

  • Measure Air Velocity in a Server Room
    Measure Air Velocity in a Server Room
    The ENVIROMUX-AV is a reliable sensor for measurement of air velocity. Up to two air velocity sensors can be connected to the ENVIROMUX-S5VDC sensor converter box. The ENVIROMUX-S5VDC can be located up to 1,000 feet (305 meters) away from the ENVIROMUX-2D/5D/16D via CAT5/5e/6 cable.
  • Air Velocity Sensor Placement in Air Duct
    Loading image...
    Correct positioning the ENVIROMUX-AV Air Velocity Sensor is critical for reliable and accurate readings of air velocity in ducts. The Air Velocity sensor should be placed far enough from sources of air turbulence in the duct. The minimum distance the sensor should be placed from the source of turbulence is a function of the duct's diameter.